Lights & Lasers
DARK SABER SS182MKII Light, Laser & Strobe
Combined subsea LED light, laser and strobe in a hard-anodized aluminum housing.
Hardware model · Reference LIGHT-SI-SS182MKII
Request a quote
System overview
The SS182MKII combines continuous illumination, strobe operation and an optional adjustable laser for inspection imagery. Independent control options allow it to work with a camera or external controller. The August 2025 datasheet identifies SS182MKII aluminum and SS184MKII titanium versions; their depth and mass values must be distinguished when ordering.
Applications
- Subsea video illumination
- Image scaling with laser option
- Inspection-system strobes
Key features
- Approximately 11,000-lumen continuous output.
- Strobe output up to 14,000 lumens for 1–100 ms.
- Constant-current LED drive with configurable dimming.
- Analog, digital and serial controls.
Technical details
Optical and strobe
- LED type
- High-brightness white LED.
- Continuous output
- 11,182 lumens typical; 10,800 lumens minimum.
- Strobe
- 12,000–14,000 lumens; 1–100 ms.
- Color temperature
- 4000 K; 5700 K available.
- Color rendering index
- 70.
- Beam angle
- 80° FWHM typical.
- Efficacy
- 127 lm/W at full intensity; source also states 182 lm/W at “10° intensity”, requiring clarification.
- Laser option
- 520 nm direct green; adjustable 5–100 mW. Horizontal/vertical line, split and spot options are listed.
- Laser wavelength note
- The printed table says 520unm; interpreted as its stated direct-green wavelength only, with exact laser option to be confirmed.
Electrical and control
- Supply
- 20–36 VDC.
- Power
- 90 W maximum.
- LED drive
- DC constant current.
- LED life
- 50,000 hours minimum.
- Thermal protection
- Automatic; 60°C maximum in air.
- Analog control
- Configurable 0–40 VDC control input; power-cycle control.
- Digital/serial
- Digital inputs, RS232 or RS485.
- Strobe trigger
- Rising/falling edge; 1 ms trigger delay; 70 µs rise to full brightness.
- Connector
- MCBH-8MP standard.
- Pinout reference
- Eight-pin power, serial and analog/digital control assignments are shown on page 3; verify ordered option before wiring.
Mechanical and environmental
- Housing
- 6061 aluminum, hard black anodized.
- Depth discrepancy
- Model table states 3000 m; opening narrative states 4000 m. Confirm pressure rating before deployment.
- Dimensions
- Ø101.6 × 121.15 mm length, excluding connector.
- Weight in air
- 1.16 kg / 2.55 lb.
- Weight in water
- 0.83 kg / 1.83 lb.
- Window
- Sapphire; acrylic optional.
- Operating temperature
- −20 to +60°C.
- Storage temperature
- −25 to +85°C.
Configuration options
Laser geometry and outputOptical option
Select line, split or spot geometry and output. Laser is an option; confirm the delivered laser class and operating instructions.
Color and controlElectrical option
Select 4000/5700 K, interface, strobe trigger and factory connector.
Compatibility and naming
Source contains conflicting aluminum depth ratings, malformed wavelength/efficacy notation and unlabeled titanium mass values. Model-specific laser manual and confirmed pressure rating remain required.
Datasheets & documentation
SS182MKII / SS184MKII — Dark Saber — specification
Applies to the named models and revision only. Housing, interface and performance differences must follow the individual model tables. Source discrepancies are recorded on the ROVITEC product pages; request the approved specification before integration.
Product advice
Let’s discuss your requirements
Tell us about your application, operating conditions and preferred configuration.
These links open your email app. Send the email to submit your enquiry; demonstration dates and configuration are confirmed by ROVITEC.
roy@rovitec.no